fbpx
Quick Contact

* required field

Close [x]

AQUASEAL HI-RISE X5™

ELASTOMERIC CUSHIONING POLYUREA FOAM

Product Description

AQUASEAL HI-RISE X5™(X5™) is a unique elastomer that expands approximately 500% of its original volume during the spray application. The resulting foam is soft, yet tough, with excellent memory retention. The in place yield is ±80 mils per gallon per 100 sq. ft. when sprayed through a LPGTM LOCK N LOAD™ gun. As X5™ expands, it bridges substrate imperfections, to virtually eliminate blowholes and pinholes when applied to porous surfaces such as vertical poured concrete and concrete masonry units (cmu). X5™ is formulated with the “ULTRABOND™” molecule therefore is self-priming in most applications.

Product Features

  • 100% solids. No solvents. No VOCs.
  • Extended tack time to allow deep surface penetration.
  • Compliant with FDA/USDA for incidental food contact.

Unlike most spray-applied polyureas, X5™ has the unique advantage of adhering to many polymeric substrates, both new and aged, typically without the use of primers or extensive surface preparation.
In house testing has shown excellent adhesion to certain clean, dry surfaces including:

  • Primers past the recoat window
  • Latex rubber
  • Crumb rubber surfaces
  • Melamine
  • Firestone SBS roofing membrane
  • SBR rubber
  • Aged polyureas • Epoxy
  • Roofing
  • Glass

NOTE! Polymer formulations vary. It is recommended that adhesion tests be performed before commencing any project using X5™. For adhesion verification SPI encourages you to submit your (substrate) sample to SPI to be sprayed and tested.

Recommended Uses

Seamless impact absorber; stand alone or with a high strength top coat.

Product Colours

X5™ is available in Neutral, Medium Grey and Sand. X5™ is photosensitive and will change color in a matter of minutes from spray application.

Aliphatic urethane, polyurea, and various other approved topcoats must be used when color stability is required.

Technical Data Sheet

Want to Chat?

If you would like to discuss your individual business needs please do not hesitate to get in touch, we can offer bespoke solutions tailored to your requirements.

Contact Us
Become an SPI Accredited Applicator!

Become an SPI Accredited Applicator!

Receive training and learn how to apply high performance coatings from the industry’s foremost experts.

Put our knowledge to work for you!

FIND OUT HOW!

You have Successfully Subscribed!

Pin It on Pinterest