POLYSHIELD HT-100F™ is a fast-set, high-performance, spray- applied, plural-component, pure polyurea elastomer. This system is based on amine-terminated polyether resins, amine chain extenders, and prepolymers. It provides a cost effective flexible, tough, resilient monolithic membrane with water and chemical resistance.
POLYSHIELD HT-100F™ is an excellent choice of elastomer to topcoat geotextile fabrics for primary or secondary containment.
100% solids. No solvents. No VOCs.
Fast-set: Handle in one minute or less.
High dry temperature stability to 250° F (121 °C) with intermittent temperatures to 300° F (148 °C).
High abrasion resistance.
High elongation for crack bridging.
Excellent encapsulation characteristics.
Compliant with FDA/USDA for incidental food contact.
Coating for steel or other substrate exposed to corrosion.
Liner for concrete tanks, concrete floors, ponds, lagoons,
reservoirs, dikes, irrigation ditches, tunnels, barges, etc.
Encapsulation for EPS or other types of flotation materials.
Encapsulation for asbestos, lead paint or other dry hazardous materials (Consult SPI).
Replace or repair failed existing sheet membrane liners.
Earthen containment used with or without geotextile.
Steel tanks, silos, and pipes.
Concrete parking decks.
Rock shield for pipelines.
POLYSHIELD HT-100F™ is available in SPI standard colors (Sand, Medium Grey, and Black). Custom colors available upon request.
It should be noted that POLYSHIELD HT-100F™ is an aromatic polyurea; therefore, as with all aromatics color change and superficial oxidation will occur.
POLYSHIELD HT-100F™ is available in a high-pigment, UV inhibited formulation for stand-alone applications, such as roofs and containment liners.
Aliphatic urethane, polyurea, and other suitable aliphatic topcoats can be used where long-term color stability and increased longevity in full sun exposure are of critical importance.